# Anamor > Anamor takes hardware products from a working prototype to a first production run: a production-ready redesign, quotes from partner factories in the US and overseas, pricing at your quantities, and management of the run through inspection and delivery. Anamor Inc., a Delaware corporation. Who it is for: hardware startups and small teams with a working prototype, and design or engineering firms whose clients need production. Runs from a few hundred units to volume production, including PCBs, enclosures and final assembly. How pricing works: reading a request and the first conversation are free. The production review is the first paid step and is priced in writing before it starts. Production is quoted per quantity, with one-time costs such as tooling and fixtures listed separately. There is no public price list. ## Pages - [How it works](https://www.anamor.xyz/how-it-works/): the steps from a request to units in your warehouse, where you decide, and a sample quote and timeline - [Example briefs](https://www.anamor.xyz/work/): example products with the request, the design considerations and the checks; our own briefs, not client work - [Start a request](https://www.anamor.xyz/start/) - [Blog](https://www.anamor.xyz/blog/): practical notes on quotes, minimum orders, tooling, tests and shipping for a first production run - [Terms](https://www.anamor.xyz/terms/) - [Privacy](https://www.anamor.xyz/privacy/) ## Contact - hello@anamor.xyz (general), projects@anamor.xyz (requests) - https://www.linkedin.com/company/anamor-xyz/ ## Blog posts - [Do US injection molders have a minimum order? What 873 molder websites say](https://www.anamor.xyz/blog/us-injection-molder-minimum-order-data/): Injection molding MOQ data: of 873 US molder websites read in November 2026, 90% say nothing about order size and 4% give a lowest quantity, most often 100. - [Can you put several different parts in one injection mold (a family mold) to cut tooling cost?](https://www.anamor.xyz/blog/family-mold-several-parts-one-injection-mold/): Family molds for a first production run: one injection mold for several parts vs separate molds, what it saves, its limits, shutoffs and what to ask. - [What does a contract manufacturer need to build a 510(k) medical device?](https://www.anamor.xyz/blog/contract-manufacturer-510k-medical-device/): What a contract manufacturer needs to build a 510(k) medical device in 2026: QMSR, FDA registration and fees, who does what, quality agreements. - [How do you make an electronics enclosure waterproof (IP67) for production?](https://www.anamor.xyz/blog/waterproof-electronics-enclosure-ip67/): How to make an electronics enclosure waterproof (IP67) for production: IP codes, gaskets vs ultrasonic welding vs overmolded seals, vents and leak testing. - [Which plastic is best for an electronics enclosure: ABS, PC/ABS, polycarbonate, nylon or polypropylene?](https://www.anamor.xyz/blog/plastic-for-electronics-enclosure/): ABS, PC/ABS, polycarbonate, polypropylene, ASA, glass-filled nylon, PBT, acrylic and TPU for electronics enclosures: heat, UL 94 ratings, outdoors and molding. - [Which US tests does an electronic product need before you sell it: FCC, UL, batteries and children's products?](https://www.anamor.xyz/blog/us-tests-and-certifications-for-electronic-products/): US tests an electronic product needs before sale (Nov 2026): FCC Part 15, radio modules, UL listings, lithium batteries and children's products, with costs. - [Sheet metal, aluminum extrusion or CNC: which metal electronics enclosure fits a first production run?](https://www.anamor.xyz/blog/sheet-metal-extrusion-or-cnc-metal-enclosure/): Sheet metal, aluminum extrusion, CNC machining or die casting for a metal electronics enclosure: tooling, lead times and minimums by quantity, radio and heat. - [Who buys the parts for a first production run, and which ones have to be made for you?](https://www.anamor.xyz/blog/who-buys-the-parts/): Turnkey, consigned or partial turnkey: who buys each part of a first production run, which parts must be custom made, how minimums and NCNR parts tie up cash. - [Where does unit cost drop on a second production run, and which cuts pay off?](https://www.anamor.xyz/blog/where-unit-cost-drops-on-the-second-run/): Where unit cost drops on a second production run with no change, which cost-down changes to molds, boards and batteries pay off, and what can cost more. - [What's actually in a production quote, and what "per unit" leaves out](https://www.anamor.xyz/blog/whats-in-a-production-quote/): What a production quote includes, what per unit leaves out, and how to compare ODM, contract manufacturer and DDP quotes on landed cost per good unit. - [What should you send a manufacturer for a quote, if your design isn't locked down yet?](https://www.anamor.xyz/blog/what-to-send-a-manufacturer-for-a-quote/): What to include in a request for quote (RFQ) when your design isn't final: what a budgetary estimate needs, what a firm quote needs, and what can stay open. - [What falls between suppliers in a first production run, and who should own it](https://www.anamor.xyz/blog/what-falls-between-suppliers/): In a first production run, each supplier owns its own part and nobody owns the assembled product: the handoffs where runs slip, and who should own each one. - [US tariffs on electronics from China, Korea, Vietnam and Mexico (October 2026): how to work out your duty](https://www.anamor.xyz/blog/us-tariffs-electronics-china-korea-vietnam-mexico/): US tariffs on electronics from China, Korea, Vietnam and Mexico (October 2026): how duty is calculated, which tariffs stack and how origin is decided. - [How do you ship your first production run from the factory to your customers?](https://www.anamor.xyz/blog/ship-first-production-run-to-customers/): How to ship a first production run from Asia to US customers: express, air or ocean freight, forwarders and brokers, 2026 lithium battery rules, 3PLs and FBA. - [How do you inspect a first production run before it ships?](https://www.anamor.xyz/blog/inspect-first-production-run-before-it-ships/): How to inspect a first production run before it ships: FAI, DUPRO and PSI stages, AQL sample sizes, an electronics checklist and what to do if a lot fails. - [Most factories say they're at capacity. Where can a small hardware team get bids?](https://www.anamor.xyz/blog/factories-at-capacity-where-to-get-bids/): Why contract manufacturers say they're at capacity, which shops take small runs with low or no minimum, where to find them and how many quotes to expect. - [Your prototype runs on an Arduino, ESP32 or Raspberry Pi. What changes when you move to a custom PCB for production?](https://www.anamor.xyz/blog/dev-board-prototype-to-custom-pcb/): Moving an Arduino, ESP32 or Raspberry Pi prototype to a custom production PCB: module vs bare chip, Compute Modules, firmware, licensing, cost and time. - [Aluminum or steel injection molds for a first production run: which fits, and when should you switch?](https://www.anamor.xyz/blog/aluminum-or-steel-injection-molds/): Aluminum vs steel injection molds for a first production run: shot life, SPI class, cost and lead time, when aluminum pays and when to start in steel. - [How to choose a partner to take your hardware into production](https://www.anamor.xyz/blog/how-to-choose-a-hardware-production-partner/): How to choose a product development firm, contract manufacturer, ODM or full-build partner for your hardware: the checks, warning signs and questions to ask. - [100 to 1,000 units: bridge tooling, urethane casting or machining?](https://www.anamor.xyz/blog/bridge-tooling-urethane-casting-or-machining/): For 100 to 1,000 plastic parts: when 3D printing, urethane casting, CNC machining or an aluminum bridge mold is the cheapest, and what besides cost decides it. - [After your Kickstarter: six things to decide before you pick a factory](https://www.anamor.xyz/blog/after-kickstarter-before-you-pick-a-factory/): Six decisions to make after a Kickstarter campaign before choosing a factory: quantity, final design, shipping, partner type, landed cost and the delivery date. - [Moving from a 3D-printed prototype to injection molding: what has to change in the design](https://www.anamor.xyz/blog/3d-printed-prototype-to-injection-molding/): How to redesign a 3D-printed prototype for injection molding: plastic, wall thickness, draft, ribs, undercuts, corners and the files a molder needs to quote. - [From working prototype to first production run: next steps for a hardware product](https://www.anamor.xyz/blog/working-prototype-to-first-production-run/): The next steps from a working hardware prototype to the first few hundred units: targets, parts, DFM, a test build, quotes, tooling, a pilot run and production. - [An ODM quoted a 2,000-unit MOQ, but we need 500. What are our options?](https://www.anamor.xyz/blog/odm-2000-unit-moq-need-500/): What a 2,000-unit MOQ is paying for, five ways to make 500 units instead, who makes runs that small, and how to tell whether 500 units add up.